Vehicle Heater
(HE) Duct Kit. £110
This kit is a complete replacement for all of
the duct and pipes from the fan housing right the way upto the
windscreen intake. The original leaky crushed duct is replaced
with new insulated duct with negligible heat loss to make the most of
your vehicle heat exchangers. The old heat exchanger pipes replaced with
new insulated ones. The fanhousing duct replaced. All clips and fittings
needed.
Contents: 2.0m x 100mm insulated Duct. 2.5m x 80mm
insulated hose. 2 x Heat Exchanger Plastic Insulated Pipes. 12 x 70mm
Screw Clips. 1.1m x 50mm Fanhousing Duct. 2 x HE Connecting Pipes. 6 x
60mm Screw Clips. 15 x 550mm cable ties.
Heater
Hose Kit Type 1 engine. £8.50
This kit comprises of 1.1m
x 50mm Air Hose and 6 x 40-60mm worm clips. This is enough for both fan
housing outlets and the air filter pre-heat pipe. The air hose is paper with
a continuous piece of wire coiled through its entire length. This hose is
more resistant to hot exhaust gas than the aluminium foil type.
Heater Hose Kit Type 1
with connecting pipes. £13.50
This kit comprises of 1.1m x 50mm Air Hose, 6 x 40-60mm worm clips
and 2 connecting pipes. This is enough for both fan
housing outlets and the air filter pre-heat pipe. The air hose is paper with
a continuous piece of wire coiled through its entire length. This hose is
more resistant to hot exhaust gas than the aluminium foil type.
1.1m x 50mm Air Hose. £3.50
Steel Connecting
Pipe. £2.00
40-60mm Worm Clips £1.00
Plastic Heater
Hose. £23.99.
VW Camper or beetle. It
transfers the heat between the heat exchanger and vehicle. Diameter of inlet
60mm
and outlet 50mm. External diameter 100mm. Length 360mm. Fully
insulated.